United States

Seakeeper Ride Installation & Service

Seakeeper Ride is a vessel attitude control system that reduces underway roll and pitch on powerboats and manages trim automatically. Aslan Yacht installs and services Ride systems in Bodrum and Turgutreis.

  • Made in the USA
  • Underway roll & pitch control
  • Automatic trim
  • 26–55 ft powerboats
  • Installation & service
Official website ↗

What is Seakeeper Ride?

Seakeeper Ride is a Vessel Attitude Control System developed for powerboats by Seakeeper, the company best known for gyro stabilizers. The manufacturer says it draws on aerospace technology to control the boat's pitch, roll and heel in turns. Once switched on, Ride runs automatically for the whole passage, so the skipper no longer has to keep adjusting trim. Full product details are on the manufacturer's site: ride.seakeeper.com.

What does it do?

  • Less roll and pitch underway in a head or beam sea, according to the manufacturer.
  • Automatic levelling when weight on board is uneven or shifts (guests, fuel, tender).
  • Speed-based trim: a preset running angle for each speed (Trim Command Curve).
  • Coordinated turns: the heel angle is controlled through the turn.
  • Better hole shot: the boat gets onto the plane faster.

Gyro and Ride together

A gyro stabilizer cuts roll at anchor and at low speed; Ride manages the boat's attitude underway. For a motor yacht that spends the day in a bay and runs back to the marina at speed, the two work together. We can assess which system suits your boat as part of our stabilizer and trim service; for a comparison with trim tabs and interceptors, see our trim tab and interceptor article.

Models

Ride 450 (up to 26 ft), Ride 525 (27–30 ft), Ride 600 (31–36 ft), Ride 750 (37–42 ft) and Ride 900–1500 (43–55 ft), plus versions for catamarans and pontoons. Length, weight, hull form and typical cruising speed all count when choosing a model.

Installation and service with Aslan Yacht

From our workshop in Turgutreis we serve motor yachts and fast boats at D-Marin Turgutreis, Yalıkavak Palmarina, Milta Bodrum Marina and Gümüşlük. Much of a Ride installation is electrical: cable sizing for the supply, fuse and isolator selection, the control display and network connection, so we also check the boat's energy and battery system. Typical work includes survey and planning, installation and commissioning, fault-code diagnosis and pre-season function tests. Contact us for a Seakeeper Ride installation or service in Bodrum.

Frequently asked questions

What is the difference between Seakeeper Ride and a Seakeeper gyro?

A Seakeeper gyro uses a spinning rotor to reduce roll, especially at anchor and at low speed. Seakeeper Ride works underway, automatically managing the boat's attitude, trim and heel in turns. The two systems complement each other.

Which boats is Seakeeper Ride suitable for?

According to the manufacturer's model table, Ride is offered for powerboats from under 26 ft up to around 55 ft, with special versions for catamarans and pontoons. The right model depends on the boat's length and hull.

Can Seakeeper Ride be retrofitted to my boat?

Yes. Ride is available on new boats and as a refit for existing ones. Before a refit we survey the boat on site to plan the mounting position, power supply and control connections.

Is Aslan Yacht a Seakeeper Ride dealer?

Aslan Yacht is not an official Seakeeper dealer; we provide installation, electrical infrastructure, commissioning and fault diagnosis for Seakeeper Ride systems in the Bodrum and Turgutreis area.

Problem on board?

Send us the boat name and marina and we'll get back to you the same day. On-site service in Turgutreis, Yalıkavak, Gümüşlük and the Bodrum marinas.

Partners

Companies we work with

For yacht automation, navigation electronics and entertainment and internet systems we work with our partners in Bodrum: we build the electrical infrastructure, they commission the systems in their field.

Alphamare

Bodrum-based Alphamare specialises in yacht automation and yacht electrical engineering: installation and modernisation of Naviop, Simrad and Raymarine YachtSense automation systems, AC/DC switchboard design and manufacturing, alarm monitoring systems (AMS) and class documentation to ABS, RINA and Lloyd's Register requirements.

Visit website ↗

Arel Marin Elektronik

Based in Turgutreis, Arel Marin Elektronik sells, installs, calibrates and services marine electronics on yachts, gulets, sailing and fishing boats: chartplotters and MFDs, radar, autopilots, VHF and AIS, sonar and satellite communication. Working with brands such as Garmin, Simrad, B&G and Furuno, they cover the Bodrum peninsula, Didim and Ören.

Visit website ↗

Promarin Elektronik

Working in Bodrum, Yalıkavak and Turgutreis, Promarin Elektronik installs and services onboard internet and Wi-Fi with Peplink/Pepwave 4G/5G, satellite communication, audio and video systems, Control4 yacht automation and KNX smart-home solutions for yachts and villas.

Visit website ↗