Flawless electrics for motor and sailing yachts.
Fault finding, maintenance, refits and authorised service for yacht electrical, electronic and mechanical systems. Your boat's power, handled with an engineer's precision.
- years in the field
- 25+
- DC systems
- 12·24·48V
- shore & generator
- 230V AC
- dealer & service brands
- 10
At sea, power leaves no room for neglect.
Our founder, Necmettin Aslan, completed his electrical technical training in 2000 and has spent more than twenty years working on yacht switchboards, battery banks and navigation systems. Today, from its workshop in Turgutreis, Aslan Yacht provides fast, documented and meticulous service to motor yachts and sailing yachts across the Bodrum peninsula.
Bow to stern, one team.
Every job is handed over with measurements, a photo report and a test protocol. Alongside your boat, in the marina or in our workshop.
Yacht Electrical
From the battery switch to the shore power inlet, we measure and inspect your yacht's AC and DC installation, trace faults to their source and repair them to marine standards.
Details NMEA 2000 / 0183 · Radar and AISMarine Electronics & Navigation
From the display on the flybridge to the antenna at the masthead, we install navigation and communication equipment, measure the network and repair faulty boards in our own workshop.
Details 12 / 24 / 48 V DC · LiFePO4 lithium batteriesEnergy & Battery Systems
From the battery bank to the inverter/charger, from solar panels to generator integration, we size, install and troubleshoot your yacht's energy system.
Details Underwater LED (blue/white/RGB) · COLREG Annex I compliant navigation lightsYacht Lighting
From the underwater lights on the transom to the navigation lights on the flybridge and the ambient LED in the saloon ceiling, we install and maintain your yacht's lighting system.
Details Seakeeper gyroscopic stabilizer · Zipwake automatic trimStabilizer & Trim
From the Seakeeper gyroscopic stabilizer to the Zipwake automatic trim system, hydraulic trim tabs and interceptors, we install, maintain and repair boat stability systems.
Details Besenzoni / Idromar · 150-250 bar working pressureHydraulic Systems
From pump, valve, cylinder and seal maintenance to pressure testing, we service Besenzoni and Idromar hydraulic systems both in our Turgutreis workshop and on board.
Details Reverse osmosis (RO) · Service for all brandsWatermaker
Whatever the brand, we service your watermaker's membrane, high-pressure pump, pre-filters and control system, and we build and install our own Leo Mare watermakers.
Details Yacht and boat mechanical · Generator mechanical serviceYacht Mechanical & Climate
From generator mechanics and seawater and bilge pumps to steering hydraulics, marine A/C and diesel cabin heaters, we handle boat mechanical work from our workshop in Turgutreis.
DetailsUninterrupted power, from the marina to open water.
We combine shore power, generator and solar in a single inverter/charger and pair it with a lithium battery bank for quiet nights at anchor. Every installation is built on calculated cable sizes and coordinated fusing.
- 01 · AssessConsumption profile and battery capacity calculation
- 02 · DesignCable size, voltage drop and fuse selection
- 03 · InstallVictron and lithium system integration
- 04 · MonitorRemote monitoring and alarm configuration
Two different worlds, the same precision.
High loads, many systems.
Keeping everything in balance while generator synchronisation, stabilisers, air conditioning and entertainment systems all run at once.
- Generator & ATS
- Seakeeper
- Zipwake
- Underwater lighting
Every amp accounted for.
Energy independence on long passages: solar, hydrogenerator, lithium batteries and efficient consumption.
- Solar & MPPT
- Autopilot
- Mast wiring
- Navigation lights
Leo Mare Watermakers: Our Own Watermaker Production
Leo Mare Watermakers is Aslan Yacht's own watermaker line, designed, assembled and tested at our Turgutreis workshop; a stainless-steel frame, PLC automation and a touch-screen control panel, configured to your boat.
- Stainless steel frame
- PLC automation
- Touch-screen control panel
- Automatic fresh-water flush
- Built in Turgutreis
From fault to handover in four steps.
- 01
Diagnosis
On-board measurements, insulation testing and thermal checks. Findings are reported with photos.
- 02
Quote
Parts, labour and time are set out clearly in a written quote. No work starts without your approval.
- 03
Execution
Marine-grade cable, terminals and labelling to recognised standards, with genuine spare parts.
- 04
Test & report
Tested under load and handed over with an updated diagram and a job report.
Real work, real boats.
Guides for captains.
Hybrid and Electric Boat Propulsion Systems: The Essentials
The electrification wave from the automotive world is now reaching yachts too. We explain how hybrid and electric propulsion systems work and what loads they add to a boat.
Smart Yacht Automation: CZone and Digital Switching Systems
Digital switching systems, where dozens of switches are replaced by a few touchscreens, are transforming the yacht electrical panel. We explain how it works and what to watch for.
Yacht Service in Bodrum and Turgutreis: Marinas and Season Planning
The marina map and season calendar of the Bodrum peninsula shape when and where you should plan yacht electrical maintenance. A practical guide from our field experience.
Frequently asked questions
Which areas do you cover?
Our workshop is in Turgutreis and we cover the whole Bodrum peninsula: D-Marin Turgutreis, Yalıkavak Palmarina, Milta Bodrum Marina, Gümüşlük and the local boatyards. Jobs outside the peninsula are planned individually according to the boat, the scope of work and the dates.
Do you work on board in the marina?
Yes, most of our work is done on board. We come to the marina or boatyard with our test equipment, spares and tools. Jobs that need a workshop, such as circuit board repairs or watermaker testing, are completed at our Turgutreis workshop.
What should I do in an emergency?
Call or WhatsApp our mobile line on +90 541 663 39 81. Briefly tell us the boat name, the marina and the symptom. We schedule the job as soon as the season's workload allows and, if necessary, talk you through the first safety steps by phone.
What information should I send with a service request?
The boat name, make and model, the marina or boatyard, the make and model of the equipment concerned, when and under what conditions the fault started, and any error codes. Photos of the panel, the equipment labels and the affected area speed up the initial assessment considerably.
How do quotes work?
For straightforward jobs we give a preliminary quote based on the information and photos you send. Where the scope of a fault is unclear, we first diagnose it on board and then provide a written quote listing parts, labour and time separately. No work starts without your approval.
Wherever your boat is, we're there.
- Address
- Bahçelievler Mah. 7168 Sok. No:3/13, 48960 Turgutreis – Bodrum / Muğla, Türkiye
- Phone
- +90 252 382 58 57
- Mobile
- +90 541 663 39 81
- info@aslanyacht.com
- Opening hours
- Monday – Saturday 08:30 – 18:30
Yacht electrical and boat electrician service on the Bodrum peninsula
From its workshop in Turgutreis, Aslan Yacht provides yacht electrical, boat electrical and marine electronics service to motor yachts, sailing yachts, gulets and catamarans across the Bodrum peninsula. For captains and owners looking for a boat electrician in Bodrum and Turgutreis, we offer measurement-based work backed by written reports. We work on board at D-Marin Turgutreis, Yalıkavak Palmarina, Milta Bodrum Marina, Gümüşlük and the local boatyards.
Typical jobs include fault finding on 12/24 V DC and 230/400 V AC switchboards, leakage current and insulation measurements, shore power and generator changeover, battery banks, inverters and lithium conversions, navigation electronics and NMEA 2000 networks, and underwater and navigation lighting. On the yacht mechanical side we look after hydraulic passerelles and swim platforms, diesel cabin heaters, air-conditioning pumps and Leo Mare watermaker systems.
Different approaches for motor and sail
A motor yacht's electrical system has to balance high loads, generator synchronisation and power-hungry equipment such as stabilisers. On a sailing yacht, every amp-hour counts: solar panels, MPPT controllers, alternator charging and autopilot consumption are planned together.
On every job we take measurements, document our findings with photos and never start work without your approval. Just send us your boat's name and marina through our contact page.